FilmTec™ Fortilife™ XC-N HP Element
Description:
The FilmTec™ Fortilife™ XC-N and XC-N HP Elements allow industrial waste waters containing salt to become a resource of purified salts for re-use and allow industries to implement circular salt principles.
When treating a water containing a mixture of mono-(e.g. chloride) and divalent (e.g. sulfate) ions, applied pressures greater than 400 psi may be needed. The The FilmTec™ Fortilife™ XC-N HP Elements offer improved sepa ration efficiency over the standard XC-N Element for systems operating between 400-1200 psi. The expanded pressure rang of the The FilmTec™ For tilife™ XC-N HP Elements along With the high ion-selective membrane enables system operations that.
• Minimize monovalent ions (e.g chloride) remaining in the concentrate water.
• Minimize divalent ion (e.g. sulfate) passage to the permeate
• Are up to 15% smaller system when using the high active area element design.
Typical Properties:
FilmTec™ Fortilife™ Active Area ft2 (m2) Feed Spacer Thickness (mil)
XC-N HP 400 (37) 34.0
Permeate Flow Rate gpd (m3/d) Stabilized Salt Rejection (%) Minimum Salt Rejection (%)
8,200 (31) 99.2 98.0
Membrane Type Polyamide Thin-Film Composite
Maximum Operating Temperature1 113°F (45°C)
Maximum Operating Pressure 1,200 psig (83 bar)
Maximum Pressure Drop Per Element 15 psig (1.0 bar)
pH Range Continuous Operation1 2-11
Short-Term Cleaning (30 min.)2 1-13
Maximum Feed Flow3 75 gpm (17m3/hr)
Maximum Feed Silt Density index SDI 5
Free Chlorine Tolerance4 <0.1ppm
Length Diameter
FilmTec™Element (in.) (mm) (in.) (mm)
FilmTec™Fortilife™ 40.0 1,016 7.9 201
XC-N HP
